Degong 956 Loader

  • Failure analysis of the end eye connection of the bucket

    Bošnjak et al. [1] studied on the failure analysis of bucket wheel excavator portal tie rod support using finite element method (FEM) simulations, Momcilovic et al. [2] horizontal hydro-turbine

    Learn More
  • Fatigue life analysis of crawler chain link of excavator

    Failure analysis and redesign of the bucket wheel excavator two-wheel bogie Srđan M. Bošnjak, Zoran D. Petković, Nenad Đ. Zrnić, M. Pantelic, A. Obradovic

    Learn More
  • (PDF) Failure Analysis of the Stacker Crawler Chain Link

    [4] Bošnjak S, Petkovi ü Z, Zrni ü N, Panteli ü M, Obradovi ü A. Failure analysis and redesign of the bucket wheel excavator two-wheel bogie. Eng Fail Anal 2010; 17 :473–85.

    Learn More
  • (PDF) Determination and Analysis of the Theoretical

    The theoretical capacity of a bucket wheel excavator is the basis of mining theory. The paper concludes. that the use of "1/cos φ" to adjust the speed of a bucket wheel excavator will result

    Learn More
  • Redesigning and Manufacturing of a Land Levelling Shovel

    Jan 01, 2014 · The failure would go up when the whole load is applied to the side plate of the shovel or on a certain section of the shovel, for example, on a 100 mm wide section. Such failures decrease the performance or result in a failure by causing faulty ground levelling at …

    Learn More
  • Failure analysis and redesign of the bucket wheel

    Bosnjak et al. [18] performed failure analysis and redesign of the bucket wheel excavator two-wheel bogie. The cause of the failure was first discussed, and then the two-wheel bogie was redesigned

    Learn More
  • Used Excavators for Sale | Auto Trader Plant

    Used Excavators for Sale. For the best choice of used excavators for sale in the UK, be sure to check out the latest selection of excavators below. You're sure to be able to find an excavator to suit your needs. Expect to find excavators from the likes of Hitachi, JCB, Caterpillar, Yanmar, Case, and Volvo – brands that are respected across

    Learn More
  • Failure Analysis of excavator bucket teeth – Heavy

    Jul 30, 2015 · Excavator bucket teeth is an important component excavators, also wearing parts, is a combination of bucket teeth and tips from the tooth base composition, both by pin connections. Since bucket teeth wear failure partly prongs, as long as you can replace with a tip. An open-air excavator bucket teeth during use due to the heavy…

    Learn More
  • Development of Unmanned Excavator Vehicle System for

    Of all the machinery and equipment used on construction sites, excavators are responsible for the greatest number of fatal accidents. Excavation is an inherently risky process due to imprecise work processes and the unstable external environment on most work sites. The resulting accidents cause serious injuries that threaten the lives of not only the excavator pilots but also those working

    Learn More
  • (PDF) An analysis of the causes of a BWE counterweight

    Measure- Bucket wheel excavator Failure analysis ments of hardness and microhardness in the vicinity of the weld were performed. The FEM Finite element analysis analyses and material tests showed that the causes of the collapse were design and weld- ing faults. Failure analysis and redesign of the bucket wheel excavator two-wheel bogie.

    Learn More
  • Dynamics, failures, redesigning and environmentally

    [8] S. Bosnjak, Z. Petkovic, N. Zrnic, M. Pantelic, A. Obradovic, Failure analysis and redesign of the bucket wheel excavator two-wheel bogie, Engineering Failure Analysis 17 (2) (2010) 473–485. [9] E. Rusiński, P. Harnatkiewicz, M. Kowalczyk, P. Moczko, Examination of the causes of a bucket wheel fracture in a bucket wheel excavator

    Learn More
  • Behavior Diagnostics of Bucket Wheel Support Structure

    [9] S. Bošnjak, Z. Petković, N. Zrnić, M. Pantelić, A. Obradović, Failure analysis and redesign of the bucket wheel excavator two-wheel bogie, Journal of Engineering Failure Analysis 17 (2010) 473–485.

    Learn More
  • 'Designing-in' failures and redesign of bucket wheel

    Dec 15, 2013 · Bucket Wheel Excavator (BWE) C-700S (operational weight 539 t, theoretical capacity 3024 m 3 /h, total height 13 m, total length 44.6 m, bucket wheel diameter 7.7 m), Fig. 1, was put in exploitation during the year 1987 in the open pit mine "Kolubara" – Serbia.Its traveling mechanism is of the two-crawler type (overall dimensions of one crawler: length 12 m, height 2.45 m, width 2.5 m).

    Learn More
  • Vlada Gasic | University of Belgrade, Faculty of

    [7]S. Bosnjak, Z. Petkovic, N. Zrnic, M. Pantelic and A. Obradovic, Failure analysis and redesign of the bucket wheel excavator two-wheel bogie, Eng Fail Anal 17 (2010), pp. 473 485. Publication Date: 2011

    Learn More
  • (PDF) Failure analysis and redesign of the bucket wheel

    In addition to the Bucket wheel excavator numerical analysis (FEA), a parallel experimental analysis of the original as well as the Two-wheel bogie failure Finite element analysis redesigned TWB is conducted on a test board especially designed for this purpose.

    Learn More
  • (PDF) An analysis of the causes of a BWE counterweight

    Measure- Bucket wheel excavator Failure analysis ments of hardness and microhardness in the vicinity of the weld were performed. The FEM Finite element analysis analyses and material tests showed that the causes of the collapse were design and weld- ing faults. Failure analysis and redesign of the bucket wheel excavator two-wheel bogie.

    Learn More
  • Liebherr R934 HDS Litronic Used Tracked Excavator for Sale

    Liebherr R934 HDS Litronic. 2000 - Liebherr R 934 | Used Tracked Excavator with 2 buckets, hydraulic quick coupler, hydraulic hammer auxiliary line, cabin front …

    Learn More
  • The influence of constructive parameters on response of

    [5] S. Bošnjak, Z. Petković, N. Zrnić, M. Pantelić, A. Obradović, Failure analysis and redesign of the bucket wheel excavator two-wheel bogie, Engineering Failure Analysis 17 (2) (2010) 473–485.

    Learn More
  • (PDF) Failure Analysis of the Tower Crane Counterjib

    [7] Bosnjak S, Petkovic Z, Zrnic N, Pantelic M, Obradovic A. Failure analysis and redesign of the bucket wheel excavator two-wheel bogie. Eng Fail Anal 2010; 17:473-85. [8] Bosnjak S, Zrnic N, Gnjatovic N, Dordevic M. Failure analysis and reconstruction design of the slewing platform mantle of the bucket wheel excavator O&K SchRs 630.

    Learn More
  • Референце – Катедра за механизацију

    1.1 Радови и прегледни радови у међународним часописима. 1.1.1 Радови у врхунским

    Learn More