Do I need a certificate to drive an excavator

  • Safety tips for novices to avoid when operating small

    Dec 07, 2020 · Yes, and should try to avoid staying in one place for too long; this can also reduce the excavator's risk of falling into the sand. The driving posture should be correct Many young manipulators like to take off their shoes and put one foot on the driver's seat when operating the machine.

    Learn More
  • Daily Vacuum Excavator Maintenance Tips to Help… | Dig

    Nov 11, 2019 · Pay attention to your mercury gauge: To ensure you're getting the very best suction performance throughout the day, operators should pay attention to their mercury levels. Low levels when not under load could be an indication of a dirty filter, hose malfunction or full spoil tank.

    Learn More
  • Precautions For Excavator Starting - News - Anhui Hekuang

    If the driving wheel is in front, the walking rod should be operated backward. If the walking bar starts in the low speed range, the engine speed will increase suddenly, so the driver should operate the walking bar carefully. When reversing the excavator, pay …

    Learn More
  • China Excavator, Grapple Excavator, Sugarcane Harvester

    Before the excavator is hoisted, it is necessary to choose a flat and stable standing platform to make the excavator stand on its What Should Be Paid Attention To When Wheel Excavator Changes Gear When the wheel excavator shifts gear, pay attention to push the manual shift …

    Learn More
  • Methods of prolonging service life of excavator bucket teeth

    Nov 05, 2021 · 5.The excavator driver should pay attention to the digging angle during operation, try to master it when digging, and the bucket teeth are perpendicular to the working surface when digging, or the camber angle is not more than 120 degrees to avoid breaking the bucket teeth due to …

    Learn More
  • Notes on the operation of excavators in rainy weather

    Feb 05, 2021 · The track mechanism should be locked. 2. Obstacles cannot exist on the excavator passage to avoid collision. 3. In excavator work scope, there should be no personnel activities. 4. In the process of excavation, excavation to underground cables, pipelines and other underground buildings should immediately stop working.

    Learn More
  • Excavator Drivers Must Learn

    Mar 26, 2020 · When the excavator is moving, the cable should be moved by staff wearing pressure resistant rubber shoes or insulated gloves. And pay attention to prevent the cable from abrasion and leakage. 11, During the work of the excavator, it is strictly …

    Learn More
  • Bucket Teeth Purchase

    Jun 23, 2021 · The driving method of the excavator driver is also very important to improve the utilization of bucket teeth. The excavator driver should try not to retract the bucket when lifting the large arm. The operation should pay special attention to the coordination of the action. Some excavator drivers often use too much force to throw the bucket on

    Learn More
  • News - How to maintain excavator undercarriage parts

    If the carrier roller is damaged, it will lead to the deviation of your excavator.The carrier roller needs to be injected with lubricating oil. If oil leakage is found, a new carrier roller needs to be updated.So usually we should pay more attention to the above cleaning, the large piece of …

    Learn More
  • What should be paid attention to during the wear-in period

    What should be paid attention to during the wear-in period for newly bought excavators? May 04, 2019. New excavators or overhauled excavators must go through a period of trial operation, usually called running-in period. The purpose of running-in is to prevent early wear of …

    Learn More
  • Technical requirements for driving ultra-small excavators

    Sep 08, 2020 · [3] It is forbidden to arrange excavators in the upper and lower excavation sections at the same time. When the excavators move in the working plane, the ground should be leveled and the obstacles in the passage should be removed. [4] When the excavator is unloading, it should be carried out after the dump truck stops.

    Learn More
  • Do excavator buckets need to be replaced frequently? What

    Apr 02, 2019 · When disassembling the pin shaft, special attention should be paid not to stand under the bucket, nor to place the foot or any part of the body under the bucket. When removing or installing pin shafts, be careful not to touch hands. 4. Before changing the bucket, the machine should be parked on a solid flat ground.

    Learn More
  • Precautions for Excavator Operation-EastChinaMachineryNetwork

    Jan 15, 2020 · The driver should pay attention to these when driving the excavator: After the excavator enters the construction site, the driver should first observe the geology of the working face and the surrounding environment. There must be no obstacles within the radius of the excavator's rotation to avoid scratching or damaging the vehicle.

    Learn More
  • How to decide to increase the trial period of bucket teeth

    Oct 08, 2021 · 1) Pay attention to the replacement of bucket teeth. In the whole application process of the bucket teeth of the excavator, the wear of the bucket teeth on the outside of the bucket is 30% faster than that on the inside. It is proposed to replace the internal and external parts of …

    Learn More
  • How to Use an Excavator on Steep Slopes and Dirt?

    Apr 02, 2020 · Pay attention to the lower part of the machine when working. 3) When working on soft ground, care should be taken not to exceed the depth of the machine's depression. 4) When the unilateral track is caught in muddy water, you can use the boom, stick and bucket to lift the track, and then pad the board or log to let the machine out.

    Learn More
  • Top Tips for Daily Vacuum Excavator Maintenance

    Jun 19, 2019 · Blower oil. Water pump oil. Pay attention to your mercury gauge: To ensure you're getting the very best suction performance throughout the day, operators should pay attention to their mercury levels. Low levels when not under load could be an indication of a dirty filter, hose malfunction or full spoil tank. Clean the air filter regularly: At

    Learn More
  • Methods of prolonging service life of excavator bucket teeth

    Nov 05, 2021 · 5.The excavator driver should pay attention to the digging angle during operation, try to master it when digging, and the bucket teeth are perpendicular to the working surface when digging, or the camber angle is not more than 120 degrees to avoid breaking the bucket teeth due to …

    Learn More
  • Something to be paid attention to in the work of a excavator

    Oct 26, 2021 · Do not install the anti-skid chain when the tire pressure is not enough, and secondly, the size of the main anti-skid chain should be different sizes of wheel hubs and wheel widths to choose the size matching the anti-skid chain, after installing the anti-skid chain, we should pay attention to the excavator driving speed should not be too fast, and pay attention to avoid sudden acceleration or …

    Learn More
  • How to choose the type of excavator bucket teeth? How to

    06. Pay attention to driving methods. The driving method of the excavator driver is also very important to improve the utilization ratio of the bucket teeth. The excavator driver should try not to retract the bucket when lifting the big arm.

    Learn More
  • What Should I Do When The Exhaust Of The Excavator Cab Is

    May 11, 2021 · Excavator cab manufacturers describe the structure of the cab, the hollow shell of the cab, doors, windows, interior and exterior trim parts, workbenches and body accessories, seats, and ventilation, heating, air conditioning, air conditioning devices, and so on. Some also include carts and other equipment.

    Learn More